110V 1000ml Paste liquid Heating Filling Machine
The semi-automatic piston filling machine produced by our company has the advantages of simple and reasonable structure, high precision, convenient cleaning and simple operation. The contact area with the material is made of 304 stainless steel, in line with GMP requirements. The sealing parts are made of PTFE and silica gel. They have the advantages of corrosion resistance, aging resistance, high temperature resistance, good sealing and so on. They are ideal filling equipment for food, pharmaceutical, chemical, daily chemical, petroleum, pesticide and other industries.
This machine has two methods, foot switch filling and continuous automatic filling; the two filling methods can be switched arbitrarily. It is recommended to use the foot switch for filling at the beginning.
2.The filling volume range is between 100ml - 1000ml. And the machine should connect air compressor for working. First time when you use the machine , you should weigh the weight of output by adjusting and make sure the volume you want.
3.This series of models need to be equipped with
external air compressor, air compressor exhaust should not be less than
0.1m3/min, equipped with pressure should be able to adjust to 0.4-0.9Mpa
range.
(Note1:We only sell
machines, do not match air compressors, customers need to buy their
own.)
(Note2: If you are not sure whether the material can be filled with this machine, please consult before placing an order)
| Voltage: | 110V/60Hz |
| Material: | The surface is stainless steel |
| Pneumatic | |
| Filling volume (ml): | 100-1000ml |
| Filling accuracy (FS) | ±0.5% |
| Production capacity (cycle/min): | 1-25 |
| Product size(Exterior sizes): | 38.97"x11"x32.87" (99x28x83.5cm) |
| Machine body: | 38.97"x11"(99x28) |
| Applicable pressure (Mpa): | 0.4-0.9 |
Magnetic switch, the use of hand wheel rotation to adjust the filling amount, easy to operate.
Adjust the rocker
filling precision
Hand handle, you can adjust the amount of filling, easy to operate.
Emergency stop switch
Emergency stop button can stop machine action immediately.
Discharge assembly, drip proof design
Filling nozzle, made of stainless steel, accurate filling without plugging, removable easy to clean and maintain.
High quality cylinder
This machine is equipped with high-quality air cylinder, which can change the filling speed by adjusting the inlet and outlet flow through the regulating valve.
This machine is equipped with a heating controller to achieve the heating function.
Adjust the speed of the cylinder moving piston rod:
The end near the moving rod (away from the handwheel) is the outlet
control valve (Adjust the speed of the cylinder moving rod to push out
the material);
The end away from the moving rod (near the handwheel) is the intake
control valve (Adjust the speed of cylinder moving rod recovery).
Clockwise downward, the discharge speed becomes slower;
Counterclockwise upward, the discharge speed becomes faster.
To ensure safe production, please read the
following precautions carefully:
1. Use a power supply and air source that conforms to the requirements
of this machine . The stability of the air source must be maintained
under continuous working conditions.
2. Before disassembling, washing or repairing this machine, please be
sure to turn off the air source and power supply first.
3. The rear half of the machine (near the control buttons) and the lower
part of the machine frame are equipped with electrical control
components. Under no circumstances should the body be washed directly
with water, otherwise there will be danger of electric shock and damage
to the electrical control components.
4. After the power switch is turned off, there is still voltage in some
circuits in the electrical control of this machine. When repairing the
control circuit, please be sure to unplug the power cord.
5. Do not keep your eyes close to the filling head during work, pay
attention to personal safety.
6. Do not put your hand on the central axis of the cylinder during the
work process, pay attention to pinching your hands.
7. Before using materials for filling, it is best to clean the machine
with detergent first, and then clean it with clean water, so as to avoid
oil stains or foreign materials and materials mixing, which will lead to
waste of materials and damage to the machine.
Advantages:
1. 304 stainless steel double layer
thickened hopper for more convenient filling.
2. One click operation, convenient and simple.
3. This machine is equipped with a heating function that can provide
insulation for materials.
4. Adopting a diameter head, the granular material will not block.
5. Imported motor, durable and powerful.
6. Imported pumps can be customized with filling models based on volume.
7.Heating
all kinds of cream,liquid,sauce.
8. This type of hopper is a
heating and insulation hopper. If customers use water as a medium for
heating and insulation, there will be a certain amount of heat loss
through heating with a heating rod and external environmental factors,
and the maximum temperature can reach around 90 degrees Celsius;
If customers want to reach a higher temperature, they can apply a medium
with a higher boiling point for heating and insulation (such as heat
transfer oil). Through heating with a heating rod and external
environmental factors, there will be a certain amount of heat loss, with
a maximum temperature of around 118 degrees Celsius;
Customers can also heat the material externally and pour it into the
hopper, which provides excellent insulation to ensure that the material
does not solidify during the filling process;
Note:
Our heating temperature controller itself has no limit on the adjustable range, but when applied to the hopper, the adjustable range is 0-118 degrees Celsius (different media have different maximum temperatures)!
9.The
temperature is controllable
You can make order
with no worry.
Any concerns just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost.