Double Barrel Piston Milking Machine for Cattle |
304 stainless steel bucket |
Parameter: |
Operating Vacuum Degree :0.04-0.05MPa |
Features: |
|
The machine is made up of 1.trolley frame,2.milk barrel,3.complete milking set,4.vacuum gauge,5.piston pump,6.reducer and gearing. Milk barrel is made up of barrel and barrel cover.The cubage of milk barrel is 25L and can contain fresh milk of 20 kilograms.There is a non-return three way valve welded in the middle of the barrel cover. After operating milk machine,keep the empty running for 3-5 minutes.There is no block and abnormal noise among all the moving parts.The convert the cluster,namely,all the connecting inlet of the claw is upward and the teat up inlet upward.One minute later,the indicator of the vacuum gauge should reach 0.04-0.045MPa.Adjust the inlet valve on the claw when the vacuum is too high or too low,Milking can start until the cooperation of long-and short space between the steel ball and pressure reed reaches 0.04-0.045MPa. |
Question: |
1.Add lubricating oil to the inner edge, about once every ten days. |
2.And you need to pressurize it to greater than 0.04MPA! |
3.The hanging direction of milking cup group should be correct, refer to the picture. |
Item Number(170053):
1×Double barrel milking machine |
You can make
order with no worry. |