Ultrasonic industrial humidifier cooler sprayer 3kg/h |
|
![]() |
|
1. To ensure the effect of atomization and
humidification, clean the inner machine regularly, once a month. The
cleaning method is as follows: A. Open the cover, clean the atomizer with a soft cloth or a brush (the atomizer and the water level sensor switch should not be scratched, and household detergent cannot be used), clean the scale, and then rinse with water; B. When watering, do not pour water into the circuit board, which will cause a short circuit. C. Close the lid 2. To ensure the normal operation of the machine for a long time, the water tank should be cleaned regularly, once a month. The cleaning method is as follows: A. Open the water tank cover; B. Clean the dirt on the inner wall of the water tank;
|
|
![]() |
|
Parameters : | |
1. Fog volume: ≥3kg/h 2. Humidity: 1%-99% 3. Power supply: AC110V 4. Power: 300W 5. Product Net Weight: 38.36 lbs 6. Control method: humidity control 7. Applicable space: 20-50m² (200-500sq.ft) 8. Hole: 4.3inch (110mm)*1 9. Water supply quality: pure water, tap water (softened) 10. Material: stainless steel 11. Air volume: 160m³/h |
![]() |
Working principle: | |
The high frequency vibration of atomizing film will
throw the water out of the surface and shape the natural and flying
water fog, produce water particle of 1-10μand float in the air without
heating or adding chemical, so as to achieve humidification. The
appropriate relative humidity will have the decisive function in the
improvement of product quality, reducing of scrap rate, anti-static,
eliminating dust, air purification and environment improvement etc.
|
|
Details: | |
![]() |
![]() |
![]() |
![]() |
![]() |
|
![]() |
![]() |
Item
Number: Ultrasonic industrial humidifier cooler sprayer--190105 1*Hose 1*Humidity controller 4*wheels |
|
You can make
order with no worry. |