Sterilization Bag Sealing Machine
adjustment knob. When using sterile packaging materials (one side is aluminum foil, and the other side is paper), the
temperature knob needs to be set at 1/3 of the temperature regulator range. First, rotate the knob counterclockwise to reduce
the temperature, then slowly increase the temperature clockwise until the sealing quality meets the requirements. When using
the same packaging material again in the future, there is no need to adjust it.
This sealing machine can maintain consistent high quality when sealing transparent sterilized packaging, with one side of the
paper facing the sealing mouth. Tubular foil material cannot be used because it is prone to sticking to the sealing rod.
After connecting the power, the sealing machine takes about 2 minutes to heat up. When the indicator light is no longer on, it
indicates that the machine can be used normally. There are pressure rod installation holes on both sides of the sealing
machine, and the pressure rod can be installed on the left or right side of the sealing machine as needed.
| Voltage | 220V |
| Power | 500W |
| Sealing Width | 0-9.84″（0-25cm） |
| Indentation Width | 0.39″（1cm） |
| Gross Weight | 13.2LB(6kg) |
| Package Size | 16.9*14*10.6inch (43*35.5*27cm) |
The roll is placed on
the support, and the positioning plate can be adjusted at any
time according to the width of the sealed bag.
Corrosion-resistant, easy to clean
and durable. The sealing plate is 250mm long and
can seal bags of various widths at the same time in the same sealing
operation.
The temperature knob
should be set at 1/3 of the temperature regulator range, first
turn the knob counterclockwise, reduce the temperature, and then turn
clockwise to
slowly increase the temperature, until the sealing quality meets the
requirements, and
then use the same packaging material, there is no need to adjust.
Turn on the power switch, the
sealing machine takes about 2 minutes to heat, when
the indicator light is no longer bright, it means that the machine can
be used normally.
Attention: The sealing plate is always at high temperature, please avoid direct skin contact.
1. Place the drum on the bracket, insert it from behind the pressure plate and sealing plate, and exit from the front. The side of
the paper must be facing downwards so that it can come into contact with the sealing guide rail. Pull out the packaging bag to
the required length, seal and cut it. Put the items that need to be sterilized into the bag and seal the other side.
2. When sealing, press down on the pressure rod until pressure is felt. Attention! If the rod is not fully compressed, the sealing
pressure cannot be reached, and the quality of the seal will be affected. During the sealing period, the pressure rod cannot be
relaxed, and this process takes approximately 4 seconds to maintain. Cut off the packaging bag, return the pole to its original
vertical position, and seal it. If the main power switch is not turned off at this time, the sealing operation can continue.
3. The handle of the cutting knife should be quickly pulled, and the cutting blade should cut through the packaging bag. If the
blade cuts too slowly, the sterilization packaging bag will not cut correctly and may wrinkle. The cutting blade has cutting
function on both sides.
separately by yourself.
You can make
order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us
with low cost.