Concrete Scabler Grinder Scarifier

The chiseling machine is mainly used to treat the surface of concrete to improve the bonding strength and surface roughness of concrete structures, thereby enhancing the durability and safety of concrete structures.
Parameters
Power: Pneumatic
Head: 7
Size: 29*49*127cm
Working width: 29cm
Air consumption: 1600L/ min
Noise level DB: 97 dB
Average equivalent of vibration level: 4.96㎡/ s
Air compressor matching requirements: the pressure is 7 kg square centimeter, the displacement is 3m3/ min

NOTE: Customers need to bring their own air compressor to ensure that the air pressure is 0.63Mpa.

Features
1. High efficiency: air pressure chisel machine can complete a large area of chisel work in a short time. Example: Concrete strength between C40-C50, depth of 3mm, chiseling capacity of 40-60 square meters per hour.
2. No damage to the main body of the foundation: When the air compressor is used to chisel the wool, the power of the machine is provided by the air compressor, this power mode does not cause any damage to the main body of the foundation, to ensure the safety of construction and structural integrity.
3. Portability: detachable handheld, easy for operators to carry and use, suitable for all kinds of construction environment.
4. Ability to adapt to different concrete strengths: air pressure chisel head tungsten steel alloy, this material has good wear resistance and hardness, can adapt to the treatment needs of different concrete strengths.
Attention
1. Do not press the chisel hard against the concrete surface. After starting, pull the handle back and forth. Otherwise, the machine will be damaged.
2. The faster the speed, the shallower the depth. The slower you move, the deeper the drill.
3. Each time can be chiseled 1-3mm deep, if you need 10mm depth, you need to chisel 3-4 times on the same plane.
4. First, an air compressor with a displacement of 3 cubic meters per minute and a pressure level of 7 kilograms per square centimeter is matched. The air pressure can be adjusted to 7 kilograms of pressure to work normally.
5. The length of the air duct should be less than 10m, and if it is extended to 15m, the pressure will drop by 0.16kg/㎡
6. Recommended air duct specification: 25/32 "fiber reinforced PVC hose.
7. Do not use the gouging machine, to be stored indoors. Place on a clean, dry level surface. Cover it with canvas. Prevent water and dust from entering the machine, causing it to rust and wear. To avoid failure.
8. Please take protective measures when using the machine. Such as wearing goggles, face masks, wear overalls, etc.

Item Number: 220565

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.