Desktop Automatic Curve Linear Edge Bonding Machine
|
Specification:
|
||||||||||||||||
|
|
||||||||||||||||
|
Instructions for Use: 1. Must be connected 220V power supply, must be connected air compressor;2. After the temperature must reach the set temperature, ability to turn on the power switch;3. You must use a three-hole socket with an effective ground wire;4. Keep your hands dry and make sure you wear insulated hand and foot protector. The power plug must be unplugged when cleaning;5. Do not place the hot parts of the machine close to the skin to prevent overheating scald;6. Be careful not to let the clothes and any part of the body near the rotating parts to prevent irreversible damage;7. To ensure that the glue pot inside the clean, no debris into which to prevent damage to the machine;8. When the power is turned on, if the abnormal phenomenon, should immediately turn off the power, unplug the plug, check by the professional maintenance;9. Prohibit the use of more than 180 degrees hot melt adhesive, the proposed temperature of 130 degrees -150 degrees; 10.The device is equipped with automatic cutting system, foot pedal switch feed belt, and then step on the cut tape.
|
 |
|