3306lb/1500kg Pneumatic Punch Press Machine
The pneumatic press is the high-pressure
gas produced by the compressor, which is transported to the
solenoid valve through the gas pipe. The working state of the cylinder
is controlled by the movement of the
solenoid valve through the switch, and the punching is completed.
1 .Compressed air as power source, high
efficiency and easy operation, can reduce labor, can be applied to
manual
operation integration, automated assembly line .
2 .Simple structure, convenient operation, cheap price, superior
performance, no noise produced during the hydraulic
system and electric standby, can save electricity consumption reduce
production cost, has the very high cost
performance .
3. Easy adjustment of output, need to adjust the air pressure is
adjustable up to the required pressure, high yield.
4.Equipped with guide plate, high accuracy, can adapt to high speed
precision impact load .
5.According to different products or mould, adjust the speed, and the
size of the pressure and stamping time .
6.Optional manual switch control, with emergency stop switch, can also
be controlled by a controller.
7.Microcomputer control system, can choose manual, semi- automatic and
fully automatic operation.
Suitable for electronics, electrical appliances, instruments, meters,
cameras, watches, jewelry, hardware and
garment, shoes and hats.
|
Voltage |
110V |
|
Pressure |
3306lb/1500kg |
|
The die hole diameter |
0.98inch/2.5cm |
|
Working Countertops Size |
8.7*11inch/22*28cm |
|
Outer diameter of trachea |
0.47inch/1.2cm |
|
Working operation |
（Adjustable 1.97inch/50mm） |
|
Working air pressure |
0.5-0.8MPa |
 |
 |
 |
|
Air source processor, through the
pressure gauge at any time to observe the change of air source pressure, effective separation of water, oil and other impurities in the air, air purification, improve the service life of the machine. |
High quality cylinder quick action, quick response, travel can be adjusted within the effective range. |
Equipped with a controller, easy
to switch between manual operation and automatic operation .(single cylinder machine, just set 1, 2, 3 section number. 1 is the pressing time setting; 2 is the second time to increase the setting; 3 is the return time setting) |
 |
 |
 |
|
Two-handed switch, two-handed operation, safer. Equipped with emergency stop switch, one key stop, more efficient. |
A clamp with an inner diameter of
0.98 ", equipped with a guide plate, is more precise and stable. |
Widened and enlarged work surface
with 1.9 "diameter blanking hole, 2 T-slots for easy securing of items. |
2. Avoid placing your hand under the punching shaft during work to avoid accidents .
3.Do not wipe the machine with a damp cloth to avoid rusting the machine .
strictly prohibited to avoid personal injury .
5.The rated pressure of the air compressor is 0.8mpa.
The capacity of the air compressor storage tank is about 60L,the larger
the capacity, the longer the service time and the more stable it is. The
displacement is optional 200L/min, the larger the
displacement, the larger the applicable machine model.
6.Note :The actual output pressure is about 80% of the theoretical pressure..
You can make
order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us
with low cost.