Electric
Sieve Electric Stainless Steel Powder Shaker 110V(300D)
|
|||||||||||||||
|
|||||||||||||||
Attention | |||||||||||||||
1.Securely tighten all nuts and bolts on the unit. Pay special attention to the motor mounting bolts. If a motor vibrates loose, damage to the power cord and to the structure may result as well as risk of personal injury. 2.Do not operate instrument with more than quantity of weight we recommended. Overloading the top and bottom weight assemblies will place excessive load on motor bearings which can cause permanent damage to the motor and to the instrument. 3.Never run motor with weights exposed. Failure to do so could result in severe personal injury or property damage. 4.Screens are fragile. Handle with care. Never place tools or parts on the screen or damage to screen may occur. 5.The noise level produced by this equipment may not be acceptable to your environment. Take every precaution to make certain that safe noise levels are met.
|
|||||||||||||||
Introduction | |||||||||||||||
300D is suitable for particles distribution analysis
of grains, powder or the solids content test of liquid in laboratory
and Quality Control Department. It has features of low noise, high
efficiency andprecision.
|
|||||||||||||||
Technical parameters | |||||||||||||||
|
|||||||||||||||
Other details | |||||||||||||||
The machine is fitted
with a 60 mesh screen. Screen size:11.81*11.81*3.94"
|
|||||||||||||||
Thicken the spring fitting, fix the
net frame, reduce the friction when working.
|
|||||||||||||||
Rubber cushioning foot pad, reduce the noise of
the machine when working.
|
![]() |
||||||||||||||
We also provide other number of
screen mesh, if you need, please contact us.
|
|||||||||||||||
Using: 1.Secure the net frame and cover of the machine before use. 2. After switching on the power, turn on the switch. |
|||||||||||||||
After using: A. Turn off the power B. Clean the screen after operation, place the machine in the right place. |
|||||||||||||||
Note: A. Turn off power supply when the machine is not in use for an extended period of time. B. The screen after operation, so they will be ready for use next time. C. Do not splash water on the machine to avoid current leakage. D. Turn the machine off immediately in the event of unusual noises and inspect for blockage or other irregularities. E. Always ensure the hand shank and tight handle are securely tightened before operation. F. Control vibration force as needed by increase or decrease the balance weight on vibration motor. |
|||||||||||||||
Item Number:
Electric Sieve Electric
Stainless Steel Powder Shaker 110V(300D)--230345
|
|||||||||||||||
You can make order with
no worry. |