新建网页 1 新建网页 1 新建网页 1

DBD750-D1Electric Hydraulic Pump

Type

 DBD750-D1
Item
Rated working pressure High pressure

70Mpa

 Low pressure

7Mpa
Flow Hypertension

1L/ min

 Low-5L/min
Motor power 750W
Voltage 110V
Frequency 60Hz
oil storage volume of 7L
outside dimensions 11.8"*9.4"*15.7"
　
Specification

Should be used first quick connector quick connector sets equippedwith hydraulic equipment connected. When plugged in, press thepower switch to operate for some time, in the absence of pressure,the output hydraulic oil all the work, and the output hydraulic oil withincreasing load all the work up to 70Mpa, the need to buck their ownsupercharged, press the solenoid valve switch the pressure back tozero and hydraulic equipment, hydraulic oil back to the fuel tank.Remove the quick connector sets the end, unplug the power.

Product details

　
Structure and working principle

Pump principle: (see oil system diagram)
(Set oil block) devices in the high pressure the output oil line whereunloading relief valve to maintain the required output pressure andthe security role.
　
The pump can be observed at any time to work when the pressurechanges, ad hoc pressure gauge, so that users always observe thechanges in the work. Control switches according to user needs, withmanual switch.

When the pressure is below 7 MPa, the low pressure pump is working and the flow rate is 5 L /min. When the pressure is above 7 MPa, the high pressure pump is working

　
Item# Description QTY Unit Note
230503 DBD750-D1High Pressure Electric Pump 1 set