5pcs/lot Rectangle 3011mm office Stamp Holder Rubber Stamp Pad photosensitive material for Photosensitive Portrait Flash Stamp

5pcs Rectangle 30x11mm Stamp Holder with Rubber Pad

Note: All the pad size is bigger than indicated size 5 mm
TB1ULCoHpXXXXX9XVXXXXXXXXXX_!!1-item_pic.gif_400x400

Fit for below Seal machine:

Photosensitive Seal Machine

   Photosensitive seal machine is new and high technology equipment, which has completely changed the traditional complicated seals making technology. Using the machine, it takes only 10 to 15 seconds to make a perfect photosensitive seal. It has many advantages, such as high working speed, seal impression is clear and no diffusing, seal surface will not shrink or deform. It is easy to operate the machine, and user can learn to use easily.

Photosensitive Seal Machine can make all kinds of photosensitive seals, portrait seals, business card seals, cartoon seals, and it can widely used in seals industry, portrait seals shop, tourism places, photocopy shops.

Reasonable design. Light in weight. Smooth action.

Exposure area: 4.7*2.1" (12×8 cm)

Voltage 110V/220V

Outside size: 15*9.8*3.5" (38×25×9 cm)

Weight: 17.6Lb (8kg)

Machine size : 14.4"x10.3"x23.6"(37x26x60cm)

Package dimensions :15.7"x12.6"x15.7" (40x32x40cm)

Net weight: 22.00 Lb(10kg)

Shipping weight: 24.24 Lb(11kg)

0000000000

Operation

Print the design on the Parchment with a laser printer.

According to the size of the design, cut the isolating film with appropriate size.

Parchment, isolating film, stamp pad, the three order: Parchment at the top, the Print face down, the middle tier is isolating film, the third layer is the stamp pad, hold well with the clamp and put into the machine.

Switch on the power, the machine began to charge, when the voltage up to 800 V, shut off the power, press the start button, complete exposure.

Take out the clamp, then take out the photosensitive pad.

  Put the pad into the stamp holder, inject ink, a stamp is done.

Characteristic of photosensitive seals

1. It doesn't need ink pad and ink, and the ink can be refilled continuously.

2. Seal impression is very clear, and does not deform. The pressure of sealing will not affect it.

3.The ink does not expand and the color does not fade, and it dries upon sealing.

4. Because it conforms to the requirement of Seal Public Order Administration Information System, it can avoid forging effectively.

Item included:

5pcs Rectangle 30x11mm Stamp Holder with Rubber Pad


Operation Print the design on the Parchment with a laser printer. According to the size of the design, cut the isolating film with appropriate size. Parchment, isolating film, stamp pad, the three order: Parchment at the top, the Print face down, the middle tier is isolating film, the third layer is the stamp pad, hold well with the clamp and put into the machine. Switch on the power, the machine began to charge, when the voltage up to 800 V, shut off the power, press the start button, complete exposure. Take out the clamp, then take out the photosensitive pad. Put the pad into the stamp holder, inject ink, a stamp is done.


Characteristic of photosensitive seals 1. It doesn't need ink pad and ink, and the ink can be refilled continuously. 2. Seal impression is very clear, and does not deform. The pressure of sealing will not affect it. 3.The ink does not expand and the color does not fade, and it dries upon sealing. 4. Because it conforms to the requirement of Seal Public Order Administration Information System, it can avoid forging effectively.