Card Manual Embossing Machine is the essential equipment of PVC card's post production and processing, which is perfect for personalization of your VIP cards, club cards, membership Cards, gift cards etc. It makes PVC cards identified or exclusive by printing convex characters on them.This Manual PVC Card Embosser Machine we offer has the characteristics of heavy duty reliable structure, accurate orientation ,small volume, beautiful appearance and convenient operation. Compared with electric embossing machines, this manual machine is more economical and better suited for small batch or personalization jobs.

How to use this machine:

1.Put the card in the card frame and fix it.

2.Move the frame and choose the position what you need.

3.Write the daisy characters plate ,use the pointer to choose the characters you need.

4.After doing step 1~3,jolt the hand-haft.

5.If the embossment depth is out fit what you need,you can adjust the bolt in adjusting hole at the bottom of machine.You can use 4th inner hexagon spanner to untie the bolt,and then use 8th outer hexagon spanner to untie outer bolt,after adjusting,please screw the bolt.

The following information show how to use the machine

100℃-150℃:Applicable stamping substances,PVC Leather,Soft adhesive paper,Business card pape

150℃-180℃:Rubber,PVC card,Wooden products

1.Please use the PVC card(85mm x 55mm) CR-80 standard.

2.When turning the characters plate,please don't drop down the hand-haft.

3.When switch the embossment size, please ward off the card frame slightly to avoid damage.

4.Never put hand or other hard objects into the machine.

5.Please move the card frame to the left end when not using the machine.

6.If the imprinted character may be deeper or shallower,undesirable,then it can be adjusted by adjusting screw in the regulation.

Means:use the Z outside-hexagonal spanner along with the code sprinter to a little loose the hold-down nut,and then inside-hexagonal spanner with the code sprinter to adjust the middle regulating screw.

Attention:turning the regulating screw in clockwise may deepen the typed characters while clockwise turning may lighten the typed characters.After finishing,please use the inside-hexagonal spanner with the code sprinter to make the regulating srcew stable,and then use the Z outside-hexagonal spanner to fasten the hold-downscrew.

Kindly Notice: Due to the effort saving design, please do not pull the lever too hard during your operation in order to protect the machine.

Features

Manual PVC Card Embossing Machine

Heavy Duty Steel Construction

11 Lines of Embossing

1 Correcting Characters For Error Correction

Adjustable Kerning,7,10 Characters Per Inch

Internal 72 Code Characters, Adopting ISO International Credit Card Special Characters, Meets All Your Needs

Indicator and Sample Card For Raised Type Location Indication

Easy to Use with No Skilled Training Required, Just Turn the dial to the Character you Want and Pull the Lever

Character depth can be adjusted to users specifications by adjusting portion located towards the bottom of the machine (Hardware is included.)

2 Years Free Warranty

Technical

Applies workpiece:Normative PVC card,That be 85.5mm×55mm

Character-selection:Character rosette turnplate

Operation mode:Manual

Raised type lines:1-11 lines

2 gears for word spacing gap:1/7 inch; 1/10 inch（only for small characters）

Raised type location indication:Indicator or sample card

Capitalization case of English letters (26)：A~Z

Capitalization & Lower Arabic numerals (20)：0~9

Small symbols (8)： '& ，．— / （）

Large symbols (17)：：M V D J $ € ￡￥ QQ20181116135044

N O ．— /（）:

Package

1 x PVC Card Embossing Machine

1 x Punch Handle

1 x Handle Fastening Screw

1 x Sample PVC Card

1 x Set of Hardware

1 x User's Manual