|
Product Description：
The Autel MaxiScan MS309 CAN OBDII/EOBD code reader provides DIYers easy
and quick access to diagnostic trouble codes and their definitions on
all OBDII compliant vehicles sold worldwide since 1996. Though small in
size, it is powerful enough to retrieve the same information as large
expensive scanners. It is the best solution to diagnose all 1996 and
newer OBDII compliant vehicles!
Product
Features：
100% brand new and high quality..
Display DTC definitions on unit screen.
Easily determines the cause of the °Check Engine Light (MIL) ±.
Turns off Check Engine Light (MIL), clears codes and resets monitors.
Retrieves generic (P0, P2, P3 and U0), manufacturer specific (P1, P3 and
U1) codes and pending codes.
Views freeze frame data.
Display monitor and I/M readiness status (emissions).
Retrieves vehicle information (VIN, CIN and CVN).
Supports CAN (Controller Area Network) and all other current OBD-II
protocols.
Easy to use and highly reliable.
Product
Features：
Retrieves generic and manufacturer specific Diagnostic Trouble Codes
(DTC), includes definitions lookup software on CD and displays DTC
definitions on screen.
Features a large easy-to-read backlit LCD screen, multilingual menu and
DTC definitions and standard 16-pin OBD-II connector; no additional
cables are needed.
Views freeze frame data, displays monitor and I/M readiness status,
turns off Check Engine Light (MIL), clears codes and resets monitors.
Supports the CAN (Controller
Area Network) protols and all other current OBD-II protocols.
Works with all OBD-II compliant U.S., European and Asian vehicles
(OBD-II is standard on all cars sold in U.S. post-1996).
Compatible
Protocols：
CAN/KWP 2000/ISO 9141-2/J1850 VPW/J1850 PWM.
Supports ISO, VPW and PWM bus systems as well as CANBUS systems.
Support vehicles
U.S. Models - European - Japanese - Asian - German - Korean.
Suitable for almost all cars after 1996 .
Using the Scan
Tool Procedures：
1. Turn the ignition off.
2. Locate the vehicle's 16-pin Data Link Connector(DLC).
3. Connect the Scan Tool cable connector to the vehicle 's DLC. The
cable connector is keyed and will only fit one way. (If you have
problems connecting the cable connector to the DLC, rotate the connector
180 and try again.
4. Turn the ignition on. But do not start the engine.
5. When the Scan Tool cable connector is properly connect to the
vehicle's DLC, the LCD display shows instructions for select New Scan.
6. Press the New Scan button. A sequence of message showing the OBD2
protocols will be observed on the display until the vehicle Protocols.
Note: If the Scan Tool fails to communicate with the vehicle's computer,
an Unable to establish a link with the vehicle message shows up.
1) Verify that the ignition is ON.
2) Check if the Scan Tool's OBD2 connector is securely connected to the
vehicle's DLC.
3) Verify that the vehicle is OBD2 compliant.
4) Turn the ignition off and wait for about 10 seconds. Turn the
ignition back to on and repeat the procedure from the step 6. |
