Variable-Speed Micro Lathe 210V Multi-Function Machine 

SPECIFICATION:

Power of Motor:750W

Swing over Bed:210mm

Swing over Cross Side:110mm

Distance Between Centers:400mm

Width of Bed:100mm

Hole Through Spindle：21mm

Taper in Spindle Nose:MT3

Number of Spindle Speeds:Variable

Range of Spindle Speeds:50-2500RPM

Number of Metric Threads:10

Range of Metric Threads:0.5-3mm

Number of Imperial Threads:8

Range of Imperial Threads:8-44 T.P.I

FEATURES:

1.Variable spindle speed of 50-2500 RPM.

2.All metal gears, shell and hand wheel.

3.High precision, able to turn out standard qualified works.

4.750W strong power, 400mm (15-3/4") processing distance.

5.Automatic tool, infinitely variable, professional tool post.

6.Telescopic sets with scale.

7.Wear-resistant, durable, accurate and professional.

APPLICATION:

1.Suitable for turnings of metal, wood, jade, etc. 2.Ideal for use in labs, workshops, engineering and education. 3.Can be turned within foreign aid, turning thread, turning taper and so on.

ADVANTAGES:

1.Telescopic sets with scale, you can intuitively see the length of the telescopic handle scale, precise scaling can be digitally standardized or adjusted by lateral movement. 2.Spindle speed can be adjusted from 50 to 2500 RPM (50-1250 low, 100-2500 high). 3.Equipped with all-metal gears, this machine is wear-resistant, durable, more accurate rotation and professional. 4.Multi-function automatic tool. 5.Accurate operation and professional performance.

ATTENTION:

1.Make sure the machine is leveled before Power on the machine.  2.Make sure that the gap between  the middle plate or guide is moderate, not too small.Moving the plate by swiving the wheel to make sure the plate can move smoothly 3. Before starting up, make sure that the voltage is within the working voltage range(230V +/- 10% or 120V+/- 10%   base on the products you bought ). 4. The cutting amount should be  controlled within 1.5 mm for steel or iron , 3 mm for Alumium or copper  to prevent damage of the motor or the motor circuit board due to overload.  PICTURES SHOW: