 |
|
|
|
 |
| Description |
|
Note:
The price excludes the confetti. |
| The machine could be place four pieces
confetti. It is controlled by special controller. One set works or many
sets work together both available. Many confetti could be spray in a
same time by a controller fly in Sky. Creating a colored ribbon raining
effects. |
|
 |
| Product specification: |
| Voltage: AC110V/60HZ |
| Power: 100W |
| Product Weight:8kg |
| Product Size:32.5*26*26:CM |
| Packing way: carton box with foam
inside |
| Feature |
| 1.This is a small four-tube fireworks
launcher, using the built-in pressure of the fireworks tube as the
consumable, through the safe electric shock transmission, will be able
to send a variety of color paper high into the air. |
| 2.This machine can bring happiness and
good luck to the ceremony and performance. Four fireworks canisters can
be installed at a time, which can be launched successively or
simultaneously. |
| 3.Professional materiales are durable
and difficult to damage. |
| 4.The effect is very compelling and
heighted the atmosphere. |
| 5.Amall and convenient ,DMX. |
| 6.Easy to operate ,jet distance of up
to 7-8 metters. |
| Item included
|
|
1* Confetti Machine |
|
1*Manual |
|
1*Power connector |
|
Method of operation |
1. Place the fireworks launcher where you
need to place it.
2. Use the angle adjustment device to adjust the machine Concierge
flowers on the outlet of the tube and adjust it to the desired
direction.
3. Connect the DMX512 signal cable between the machine and the console.
4. Connect the power cord to the machine and plug it into the power CON
power input socket.
5. The local control mode is DMX512 signal control, and the four heads
occupy 8 channels (single head occupies 4 channels)
6. First set the machine address code then open the console and deliver
the DMX512 signal to the machine. The green light below the dial code on
the machine will light up (when the machine is powered on).
7. Deliver the power to the machine according to the requirements, and
check whether the power indicator is on.
8. Control the machine in the untriggered state with the control desk.
9. Place the electronic Concierge flowers inside the Concierge flowers
set and lock it with the screw knob (note the exit direction of the
Concierge flowers).
10. Insert the lead plug of the electronic Concierge flowers into the
Concierge flowers lead socket on the machine. Note: When multiple units
are installed, save one sequence (four heads). Check the machine's
Concierge flowers, check whether the light is green.If not, proves that
it is not available.
11. Finally, use the console to control the corresponding electronic
Concierge flowers to do the jetting action. |
|
 |
|
 |
 |
| |