|
 |
|
Pneumatic Chipping Hammer |
 |
| 150mm-----Mainly used to eliminate
welding slag burr, sheet metal patching |
| 190mm----- mainly used to
eliminate welding slag burrs, etc., rivet |
| 250mm----mainly
used for sealing iron pipes and cutting brake pads. |
|
Description |
| Equipped with a shovel
head, to shovel the impact of metal components flash, burr and |
| sand removal of pneumatic
tools. |
| Suitable for sand removal
of small castings, beveling before welding and removing |
| welding slag after
welding. |
| Suitable for baking paint,
auto repair, hardware, ceramic lighting, stone processing, |
| wall treatment
(construction), craft carving, polishing and other operations. |
 |
| Model A:150MM pneumatic
chipping hammer |
|
Parameter |
|
specifications |
1-5/8 inch air
hammer |
| stroke |
40mm |
| chisel shank |
10mm |
| blow per minute |
4,500BPM |
| air inlet |
6.35mm |
| average air
consumption |
0.1m^3/min |
|
| Feature |
| 1.Small in size and light
in weight, easy to carry. |
| 2.Metal shell, durable, fully polished
handle, beautiful and rustproof. |
| 3.A variety of blade specifications,
alloy blade, high hardness, wear resistance, a |
| variety of head design, diverse
functions. |
| 4.Strong spring: spring alloy steel
production, good elasticity is not easy to break. Not |
| easy to fall off and deform. |
| 5.Product configuration: host *1,
shovel knife *4, spring *3, connector *1. |
 |
 |
| Model B:250MM Pneumatic Chisel Air
Hammer |
 |
|
Parameter |
|
specifications |
3-5/8 inch air
hammer |
| stroke |
90mm |
| chisel shank |
10mm |
| Suitable plate
thickness |
0.5-1mm |
| blow per minute |
2200BPM |
| Average air
consumption |
0.1m^3/min |
|
| Feature |
| 1.The spring made of alloy steel is
very elastic and not easy to break |
| 2.Can be used for any hammering
operation |
| 3.Equipped with two hammer head,
hammer head after high temperature heat |
| treatment, strong and
durable |
| 4.Used in the automotive industry,
sheet metal industry, tire repair industry, |
| construction industry, machinery
factory production line and other industries |
| 5.Product configuration: The joint
handle*1 ,Flat hammer*1,host *1, spring *3, connector *1. |
 |
| |