Automatic Tape Dispenser Machine

ZCUT-9 could cut fibril tape, hard tape, acetate, glass wall paper, double side tape, Nomex, sealing rubber, scotch tape, industrial tape, masking tape, plastic adsive tape and so on. The section not sticky material, paper tape, insulating film, aluminum foil, copper foil and so on.

Automatic tape Dispenser can be set according to the length of the cut, and cut off the tape straight, parallel to paste on the edge, Adhesive tape cutting length, paste the interval can be adjusted freely according to user needs¡£
To operate automatic tape dispenser remove the tape at the length will come out automatically and cut
Size indications can be easily seen by LED displays, and operations are simple ,only press the cm key or mm key to set the length

Identification of Parts

How to Manage a Curling Tape

1)Press the Hold DOWN ROLLER RELEASE BUTTON in order to open the HOLD DOWN ROLLER UNIT

2)Extend the ROLLER LOCK LEVEL so that the roller will not turn.

3)Close the HOLD DOWN ROLLER UNIT

With the rollers locked,the tension may cause the length to vary.Cut several test pieces in order to adjust the length if needed.

Specification
Voltage  110v
Input Voltage Range  ¡À 5%
Wattage  116*140*213mm (4.57"*5.51"*8.39")
Dimensions  2.5kg (5.51lbs)
Weight  Anti-Static ABS
Body Material  5mm-999mm (0.2"-39.33")
Tape Length  6mm-60mm (0.24"-2.36")
Tape Width  200mm/sec.(using Craft Tape)
Feeding Speed  300mm (11.81")
Max.Outside Dia.of Roll  Power Code

Instruction

Notes£º
  • Do not leave the tape dispenser in direct sunlight
  • Do not drop the tape dispenser or subject it to heavy shocks
  • Do not use volatile liguids such as thinner. benzine. etc. to clean the dispenser .But wipe it only with dry cloth
  • Do not use the tape dispenser in humid or dusty place
  • Do not insert bars or plates into the tape outlet
  • Do not insert your finger into the tape outlet